Course

Gas Engineering Operative


Apply now

Course overview

Gas Engineers install and maintain gas appliances in a domestic or non-domestic setting.  Appliances can include but are not limited to, a range of work categories such as central heating boilers, unvented hot water storage, ducted air heaters, cookers, space heaters, meters, alternative fuel, boosters, testing, and purging for industrial pipework.

Roles in gas engineering are physical in nature and may involve lifting and moving equipment, working at heights, and working in confined spaces.

Customer service skills and being tidy and respectful are important qualities for a gas engineer as they can often find themselves working in customers’ homes. Responsibilities will include explaining how installations and appliances work, providing energy efficiency advice, and ensuring customer service excellence at all times.

By the end of the apprenticeship, gas engineers will be registered on the Gas Safe® Register as competent to undertake work on at least four appliances.

Course facts


Course Length

Entry Requirements

How much does it cost?

Qualification

Course Length


Two to three years depending on the levels of experience the apprentice already has.

Entry Requirements


You will need to achieve Level 2 Functional Skills in English and maths, if you don’t already have these qualifications or equivalent GCSEs.

Equivalent GCSEs are grade C or higher or grade 4 or higher. If you are not quite at this level, you will have the opportunity to work towards these qualifications as part of your apprenticeship.

These qualifications need to be achieved before the End Point Assessment is taken.

In addition. you will need to be aged 16 and over for your employer to benefit from support funding.  If you’re older than 19, your employer may need to put some of their own money towards your studies.

You will need to have been a UK resident for the previous three years, or a national of any European Union (EU) country or European Economic Area (EEA) for the previous three years. This is unless you have an immigration status which exempts you from the three-year residency requirement. Contact JTL for more information about this.

You can apply for an apprenticeship while you’re still in education, but you need to have left before you can start with us. As a rule of thumb, you must have left compulsory education after the last Friday in June of the academic year in which you are applying.

You will need an employer before you can start an apprenticeship, although you can apply before you’ve arranged one.

How much does it cost?


The full training cost for a Gas Engineering Apprenticeship is £22,000, however as an apprentice you will not be required to pay anything towards your apprenticeship other than any travel costs you may incur getting to and from your employer’s workplace.

For employers there is no cost for hiring an apprentice aged 16 to 18 years.  If you recruit an apprentice aged 19 or over then the costs are 5 per cent of the full cost of the apprenticeship (e.g. £1,100 over 4 years).

For apprentice wages, JTL recommend that employers follow the JIB pay rates.

Qualification


Level 3 Diploma in Gas Engineering

Awarding body – BPEC and City & Guilds

You can view full details of the standard for the Gas Engineering Level 3 qualification here.

Module information

Course details

Apprentices will complete the level 3 gas engineering qualification to develop the skills, knowledge, and behaviours they need to safely install, commission, decommission and service and repair gas appliances in either a domestic or non-domestic setting.

Years 1-3
  • Health and safety in gas utilisation
  • Scientific principles in gas utilisation
  • Combustion and properties of gas
  • Buildings, services, and structures
  • Gas safety principles
  • Specific core installation and maintenance
  • Tightness test, purge, commission, and de-commission gas pipework up to 35 mm (1¼) diameter in small gas installations
  • Install, commission, and de-commission gas pipework up to 35 mm (1¼) diameter in domestic and small commercial premises
  • Install domestic gas water heaters and wet central heating appliances
  • Maintain gas water heating and wet central heating appliances
  • The installation, commissioning, and safety aspects of hot water systems for domestic use in accordance with UK building regulations

Delivery and Assessment

The course is usually delivered on a day-release basis, meaning you will go to college or a JTL training centre for one day a week and spend the rest of your time at work. Some of our centres offer a block release option.

The End Point Assessment (EPA) is expected to take place in the final 3 months of the apprenticeship. You must pass this to complete your apprenticeship and become a fully qualified engineer. The EPA consists of a multiple-choice knowledge assessment and a portfolio assessment which includes gas safe registration, a competency test, a work log review, and an interview.

Grades of Pass and Distinction are available.

You can view full details of the standard for the Gas Engineering Level 3 qualification here.

JTL Learners in classroom

Why choose JTL?

  • Free starter toolkit in your first year*
  • Free study books
  • Dedicated training officer 
  • Free recruitment service 
  • Full equipped workshops at our dedicated training centres 
  • Dedicated support/EIC/JIB registered electrician skills development fund 
  • JIB PMES apprentice card 
  • Help accessing funds
  • Free recruitment process for employers
  • Ofsted Grade 2 GOOD Provider 
  • Regional national awards
  • CSCS card

*Once you have completed 3 months of your apprenticeship.

JTl-26 lo res

Equality and Diversity

JTL is committed to equality and diversity for all. We want to establish a culture of equality and diversity so that all applicants, apprentices, employers, sub-contractors and staff have the opportunity to work in and towards an environment that is non-discriminatory.

Equality and Diversity

Career progression

Successful apprentices are eligible for membership with the Institution of Gas Engineers and Managers (IGEM) and professional registration as an Engineering Technician (EngTech).

Fully qualified gas engineering apprentices can progress into roles such as supervising an apprentice, supervisory roles, project management roles, owning and managing their own business, advanced engineering, design and planning, teaching, or training others.

As a fully qualified plumber you can go on to earn close to £32,000 per year (£31,787 )*

*Source: Annual Survey of Hours and Earnings 2019 complied by the Office of National Statistics (ONS). Data is published annually in November.

Our latest

Liam Davis & Nathan Portman

View all stories

Hear from both Nathan & Liam, two JTL apprentices who made it to the Grand Finals of the World Skills UK Competition.

Read
Our latest

Green Vision - William Jack Edis

View all stories

“In general, it has been enjoyable and has given me the opportunity to do lots of things with my life. I have worked away from home a lot of the time which has given me lots of memories, good and bad. I’ve met lots of good friends and worked with some top people.”

Read
Our latest

Amy Lister

View all stories

“Amy’s progression was undeniable; she was getting to the point where she was acquiring an amount of knowledge close to my own. When her apprenticeship with JTL finally finished, I immediately offered her a place as a full-time employee.”

Read
Our latest

Luton Youth Partnership

View all stories

Luton Youth Partnership thanks Wilmott-Dixon and JTL Training for their service.

Read

How to apply


1

Complete online application form

2

Pass our JTL initial assessment

FAQs

Need more information?

Read more

Related articles

JTL introduces Period Equity Project to further support learners and staff
JTL introduces Period Equity Project to further support learners and staff
Read post
National Apprenticeship Week 2023
National Apprenticeship Week 2023
Read post
Darke & Taylor Apprenticeship blog: A Winter update
Darke & Taylor Apprenticeship blog: A Winter update
Read post